The Lvquan Heat Storage High Temperature Incineration Equipment, sourced from a reliable Chinese manufacturer and supplier, offers exceptional quality and cost-effective pricing, ensuring efficient waste incineration at high temperatures.
The Lvquan Heat Storage High Temperature Incineration Equipment, proudly manufactured in China by a renowned manufacturer and supplier, is a cutting-edge solution for waste incineration. This equipment offers unparalleled quality, with its robust construction and precision engineering ensuring reliable and efficient performance. The heat storage technology employed by the incinerator enables high-temperature incineration, ensuring complete waste destruction and minimizing environmental impact. Furthermore, the competitive price of this equipment makes it an attractive option for businesses seeking cost-effective waste management solutions.
Regenerative Thermal Oxidizer (RTO)is an organic waste gas treatment equipment that combines high-temperature oxidation with multi-tower thermal storage technology.It effectively reduces heat loss and saves energy.
| Application Industries | Petrochemital,printing coating/gluing coating dlying,wire enameing pharmaceuticals, and chemicals,etc. |
| Concentration Range | 500~5000mg/m³(2~12%LEL). |
The tower-type RTO heats the organic waste gas to above 760 degrees Celsius,causing the VOC in the waste gas to be oxidized and decomposed into carbon dioxide and water.The high-temperature gas produced by oxidation flows through specially de-signed ceramic heat storage bodies,causing the ceramic bodies to heat up and "store heat,"which is used to preheat the subsequent incoming organic waste gas.This saves fuel consumption for waste gas heating.The ceramic heat storage body should be di-vided into three or more (including three)zones or chambers,and each heat storage chamber undergoes a cycle of heat storage-release-cleaning,continuously working.
1.Low energy consumption:When the inlet concentration is between 1500~2000mg/m3,it can be maintained naturally without fuel supply
2.High heat recovery efficiency:Using new materials (heat storage ceramics)technology,heat recovery efficiency can reach 95%.
3.Convenient operation:It can be controlled by traditional electrical control or industrial controllers,and after parameter calibra-tion,it can be activated or deactivated with a single button,realizing unmanned supervision.
| Valve selection | Poppet valve | Butterfly valve |
| Purification rate | <98% | <99.3% |
| Installation method | Integral installation | Single installation |
Regenerative Thermal Oxidizer (RTO)is an organic waste gas treatment equipment that combines high-temperature oxidation with multi-tower thermal storage technology.It effectively reduces heat loss and saves energy
| Process 1 | Process2 | Process3 | |
| Simple schematicdiagram |
|
|
|
| The first room | 1Exhaust gas absorbs heat and heat storageceramic body 1 exerts heat | 1Heat storage ceramic body 1 untreatedexhaust gas back-blowing furnacecombustion | 1The clean gas is discharged fromthe heat storage ceramic body 1 toabsorb heat |
| The second room | 2Clean gas out of the heat storage ceramicbody 2 heat absorption | 2Exhaust gas absorbs heat and heat storageceramic body 2 exerts heat | 2Heat storage ceramic body 2untreated exhaust gasback-blowing furnace combustion |
| The third chamber | 3Heat storage ceramic body 3 untreatedexhaust gas back-blowing furnacecombustion | 3Clean gas discharge heat storage ceramicbody 3 absorbs heat | 3Exhaust gas absorbs heat and heatstorage ceramic body 3 exerts heat |
| Combustion | High temperature oxidative decomposition | ||
Regenerative Thermal Oxidizer (RTO)is an organic waste gas treatment equipment that combines high-temperature oxidation with multi-tower thermal storage technology.It effectively reduces heat loss and saves energy.
| Specification Model | RTO-20 | RTO-50 | RTO-100 | RTO-150 | RTO-200 | RTO-250 | RTO-300 | RTO-350 | RTO-450 | RTO-500 | |
| Treatment air volume m3/h | 2000 | 5000 | 10000 | 15000 | 20000 | 25000 | 30000 | 35000 | 45000 | 50000 | |
| Organic gas concentration | 500～5000mg/m3(mixed gas) | ||||||||||
| Treatment object |
Trichlorobenzenes, alcohols, ethers, aldehydes, phenols, ketones, esters and other volatile organic compounds (VOCs); malodorous gases and so on. |
||||||||||
| Heat storage efficiency | ≤95% | ||||||||||
| Purification efficiency | ≥97% (executed according to GB16297-1996 standard) | ||||||||||
| Burner heating capacity ×10^4kcal/h | 8.4 | 21 | 42 | 63 | 84 | 105 | 126 | 168 | 189 | 210 | |
| Fuelconsumption | Initial operation | The burner is set at maximum output | |||||||||
| Normaloperation | Based on the waste gas concentration, a lower flame can be maintained by the combustion machine when the concentration is above 1500mg/Nm³ | ||||||||||
| Bed pressure drop | ≤ 3200pa | ||||||||||
1.If the exhaust gas contains corrosive components such as sulfur and chlorine,it is nec-essary to inform the manufacturer during the selection process. Corrosion-resistant ma-terials such as SUS2205 or higher need to be used for processing and manufacturing, and special treatment is required for such gases in the later stage.
2.The concentration of the mixed waste gas entering the energy storage high-tempera-ture incineration equipment shall be within the range of less than 1/4 LEL lowerexplo-sion limit.
3.The maximum temperature used by the energy storage high-temperature incineration device is≤960°C.High-energy substances and high-concentration gases need to be di-luted.If special requirements exist,they should be indicated to make specific require-ments when designing thermal insulation.
4.The gas entering the energy storage high-temperature incineration equipment shall not contain dust particles or oil mist that may cause blockage or tempering,so as to pre-vent tempering or blocking of the energy storage ceramic.
